7387/1 nternational Standard (ISO INTE RNATIONAL ORGANIZATION FOR STANDARDIZATION ME KAYHAPOAHAA OPrAHW3AUMA nO CTAHAAPTW3AUWWORGANISATION INTE RNATIONALE DE NORMALISATION Adhesives with solvents for assembly of u PvC pipe elements - Characterization - Part 1 : Basic test methods Adhesifsa solvantpourassemblages d'élements decanalisation enuPvC-Identification -Partie1:Methodes d'essai de base First edition - 1983-09-15 0 7387/1-1983 (E) UDC 665.939.5 : 621.643.29 : 620.1 Ref. No. ISO 7387/1-1983 (E) Descriptors : piping, plastic tubes, unplasticized polyvinyl chloride, adhesive, tests, determination, viscosity, dynamic viscosity, dry matter. Price based on 10 pages Not for Resale Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (iso member bodies). The work of developing International interested in a subject for which a technical committee has been authorized has the and non-governmental, in liaison with iso, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the iSO Council. Standard IS0 7387/1 was developed by Technical International Committee ISo/TC 138, Plastics pipes, fittings and valves for the transport of fluids, and was circulated to the member bodies in May 1981. Greece Australia Romania Ireland South Africa, Rep. of Austria Belgium Israel Spain Brazil Italy Sri Lanka Canada Sweden Japan Korea, Rep. of Czeichoslovakia Switzerland USA Egypt, Arab Rep. of New Zealand Poland USSR France Germany, F. R. Portugal The member body of the following country expressed disapproval of the document on technical grounds : United Kingdom @ International Organization for Standardization, 1983 Printed in Switzerland Copyright International Organization for Standardization Not for Resale censefromIHS INTERNATIONAL STANDARD ISO 7387/1-1983 (E) Adhesives with solvents for assembly of u PvC pipe elements - Characterization - Part 1 : Basic test methods 0 Introduction Part 2 : Secondary test methods ISo 7387 is a collection of test methods relating to the characterization of adhesives with solvents for the assembly of Bulk density u PVC pipes and fittings. Flash point These methods have been divided into groups, each of which is issued as a part of IS0 7387. Part 3 : Other test methods Part 1 consists of the basic methods which are essential in deciding the uniformity of an adhesive in relation to itself. Determination of the total quantity of resin and powder substances Part 2 consists of methods which can, if necessary, be used to supplement the previous ones for the same purpose. Extraction and determination of the total quantity of solvents Part 3 gives methods for separating the constituent parts of the adhesives, for thepurpose of closer characterization. 1 Scope and field of application Methods of testing suitability for use are planned to supple- ment the test methods for characterization. This part of ISO 7387 specifies the basic test methods for adhesives with solvents for the assembly of u PvC pipe The various test methods are given in the following parts of elements for characterization purposes. ISO7387. It is divided into three sections : Part 1 : Basic test methods Section one : viscosity: Dynamic viscosity according to the shear rate Section two : conventional dry matter content; - Brookfield viscosity Conventional dry matter content Section three : ash content. (Applicable only to adhesives which do not contain a filler unstable at the test Ash content temperature.) Copyright International Organization for Standardization e from IHS Not for Resa
ISO 7387-1-1983Adhesives with solvents for assembly of u pvc pipe elements. Characterization. Part 1
文档预览
中文文档
12 页
50 下载
1000 浏览
0 评论
309 收藏
3.0分
温馨提示:本文档共12页,可预览 3 页,如浏览全部内容或当前文档出现乱码,可开通会员下载原始文档
本文档由 人生无常 于 2024-10-12 14:10:04上传分享