This publication consists of the following IsO documents collated in sequence: ISO 16039:2004 Published 15-04-2004 IS0 16039:2004, amendment 1:2013 Published 15-01-2013 This publication has not been adopted as a British Standard. bsi. ...making excellence a habit. ISO INTERNATIONAL STANDARD 16039 First edition 2004-04-15 Road construction and maintenance equipment slipform pavers Definitions and commercial specifications Materiels pour la construction et I'entretien des routes Machinespour le pavageDefinitions etspecifications commerciales Reference number ISO 16039:2004(E) ISo @ ISO 2004 ISO 16039:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. , Imperial College London, Version correct as of 20/12/2019 Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below Licensed copy: Imperial College , C ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means IsO's member body in the country of the requester. ISO copyright office Case postale 56. CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org ii @ISO2004-All rights reserved ISO 16039:2004(E) Contents Page London, Version correct as of 20/12/2019 Introductior 1 Scope 2 Terms and definitions 3 Operating principle. 4 Description of a slipform paver.. 4.1 Basic unit. 4.2 4.3 Devicesforexecutionofroad-safetystructures... 4.4 Equipment of slipform pavers for execution of roadways, airfields, and other large pavement structures... 5 Adjustable parameters on a slipform paver... 6 Commercial specifications. 6.1 General... 6.2 Main assemblies. 6.3 General characteristics of a slipform paver... 6.4 Engine's data.. 6.5 Fluid-tankcapacities I College 6.6 Electricalsystem... 6.7 Dimensional characteristics (small paver). 6.8 Additional features of a slipform paver. 6.9 Additional equipment... Imperial Annex A (informative) Examples of slipform-paver designs and their assemblies. Bibliography @ Is0 2004-All rights reserved ii ISO 16039:2004(E) Foreword 9 f20/12/201 International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. as International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2 correct The main task of technical committees is to prepare International Standards. Draft International Standards International Standard requires approval by at least 75 % of the member bodies casting a vote. Version Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.IsOshall notbeheldresponsibleforidentifyinganyorallsuchpatentrights. ISO 16039 was prepared by Technical Committee ISO/TC 195, Building construction machinery and equipment. iv IsO2004-Allrightsreservec ISO 16039:2004(E) Introduction This International Standard deals with slipform pavers for placing, compaction, forming and finishing cement concrete in roadway, street, airport construction and other structures of related design. This International Standard provides definition of equipment and technical characteristics of machinery as well. Enclosed figures explain performance of slipform pavers and their components. @ ISO 2004 - All rights reserved V