BS EN ISO BRITISHSTANDARD 15984:2002 Incorporating Corrigenda Nos. 1 and2 Open end blind rivets with break pull mandrel and countersunk head - A2/A2 The European Standard EN ISO 15984:2002 has the status of a British Standard ICS 21.060.40 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW British Standards BS EN IS0 15984:2002 National foreword This British Standard is the official English language version of EN ISO 15984:2002. It is identical with ISO 15984:2002. BS EN ISO 15984:2002, together with BS EN ISO 15980:2002, BS EN ISO 15981:2002, BS EN ISO 15982:2002, BS EN ISO 15983:2002, BS EN ISO 16582:2002, BS EN ISO 16583:2002, BS EN ISO 16584:2002 and BS EN ISO 16585:2002, supersedes BS 7349-2:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee FME/6, Rivets, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself conferimmunity from legal obligations. Summary of pages This British Standard, having been prepared under the This document comprises a front cover, an inside front cover, the EN ISO title direction of the Engineering page, the EN ISO foreword page, the ISO title page, pages ii and ii, a blank Sector Policy and Strategy Committee, was published page, pages 1 to 6, the Annex ZA page and a back cover. under the authority of the The BSI copyright notice displayed in this document indicates when the Standards Policy and Strategy Committeeon documentwaslastissued. 20 November 2002 Amendments issued since publication Amd. No. Date Comments @ BSI 23 November 2004 14329 5 February 2003 Correction to EN ISO foreword page and Corrigendum No.1 addition of Annex ZA page 15324 23 November 2004 Addition of supersession details Corrigendum No.2 ISBN 0 580 407721 EN ISO 15984 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November2002 ICS21.060.40 English version Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) Rivets aveugles a rupture de tige a corps ouvert, a tete Offene Blindniete mit Sollbruchdorn und Senkkopf - A2/A2 fraisée -A2/A2 (ISO 15984:2002) (ISO 15984:2002) ThisEuropeanStandardwasapprovedbyCENon14October2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standardsmaybeobtained onapplicationtotheManagementCentreortoanyCEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, cen EUROPEANCOMMITTEEFOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG ManagementCentre:ruedeStassart,36B-1050Brussels @2002CEN All rights of exploitation in any form