BS EN ISO BRITISH STANDARD 15983:2002 Incorporating Corrigenda Nos. 1 and 2 Open end blindrivets with break pull mandrel and protruding head - A2/A2 The European Standard EN IS0 15983:2002 has the status of a British Standard ICS 21.060.40 BSi British Standards BSEN IS0 15983:2002 National foreword This British Standard is the official English language version of ENIS0 15983:2002.It is identical with IS0 15983:2002. BS ENIS0 15983:2002,together with BSEN IS0 15980:2002, BS EN IS0 15981:2002, BS EN IS0 15982:2002, BS EN IS0 15984:2002, BSENIS016582:2002,BSENISO16583:2002,BSENISO16584:2002 and BS EN IS0 16585:2002, supersedes BS 7349-2:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee FME/6, Rivets, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BsI Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Usersareresponsibleforitscorrectapplication. Compliance witha British Standard does not ofitselfconferimmunity from legal obligations. Summary of pages This British Standard, having This document comprises a front cover, an inside front cover, the EN Iso title beenprepared underthe page, the EN ISO foreword page, the ISO title page, pages ii and ii, a blank direction of the Engineering page, pages 1 to 6, the Annex ZA page and a back cover. SectorPolicyand Strategy Committee, was published The BSI copyright notice displayed in this document indicates when the under the authority of the document was last issued. Standards Policy and Strategy Committee on 20 November 2002 Amendments issued since publication Amd. No. Date Comments 14321 28 January 2003 Replacing the EN ISO foreword page @ BSI 23 November 2002 Corrigendum No. 1 and incorporating the Annex ZA page 15323 23 November 2004 Addition of supersession details Corrigendum No. 2 ISBN 0580 407586 EN ISO 15983 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November 2002 ICS21.060.40 Englishversion Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002 Rivets aveugles a rupture de tige a corps ouvert, a tete Offene Blindniete mit Sollbruchdorn und Flachkopf -A2/A2 bombée-A2/A2(ISO15983:2002) (ISO 15983:2002) This European Standard was approved by CEN on 14 October 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standardsmaybeobtained onapplicationto theManagement Centreorto any CEN member. under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, cer EUROPEANCOMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG ManagementCentre:ruedeStassart,36B-1050Brussels 2002CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15983:2002 E worldwide for CEN national Members. EN ISO 15983:2002 CORRECTED 2002-12-18 Foreword This document (EN ISO 15983:2002) has been prepared by Technical Com