BS EN ISO BRITISHSTANDARD 15980:2002 Incorporating Corrigenda Nos. 1 and2 Open end blind rivets with break pull mandrel and countersunk head - St/St The European Standard EN IS0 15980:2002 has the status of a British Standard ICS 21.060.40 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW British Standards BSENIS0 15980:2002 National foreword This British Standard is the official English language version of ENIS015980:2002.ItisidenticalwithIS015980:2002. BS EN IS0 15980:2002, together with BS EN IS0 15981:2002, BSENIS015982:2002,BSENIS015983:2002,BSENIS015984:2002, andBSENIS016585:2002,supersedesBS7349-2:1993whichiswithdrawn The UK participation in its preparation was entrusted to Technical Committee FME/6, Rivets, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitorrelatedinternational and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity fromlegalobligations. This British Standard, having Summary of pages beenpreparedunderthe direction of the Engineering This document comprises afront cover,an insidefront cover,the EN Iso title Sector Policy and Strategy page, the EN ISO foreword page, the IsO title page, pages i and ii, a blank Committee, was published page, pages 1 to 6, the Annex ZA page and a back cover. under the authority of the Standards Policy and Strategy The BSI copyright notice displayed in this document indicates when the Committee on document was last issued. 20November2002 Amendments issued since publication Amd. No. [Date Comments BSI23November2004 14322 22 January 2003 Replacing the EN ISO Foreword page and Corrigendum No. 1 Incorporating the Annex ZA page 15348 23November2004 Addition of supersession details Corrigendum No. 2 ISBN 0 580 407616 EN ISO 15980 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November2002 ICS 21.060.40 English version Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) Rivets aveugles a rupture de tige a corps ouvert, a tete Offene Blindniete mit Sollbruchdorn und Senkkopf - St/St fraisée - St/St (ISO 15980:2002) (ISO 15980:2002) ThisEuropeanStandardwasapprovedbyCENon14October2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standardsmaybeobtained onapplicationtotheManagementCentreortoanyCENmember. This European Standard exists in three official versions (English,French, German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centrehas the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. cer EUROPEANCOMMITTEEFOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels @2002CEN All rights of e