BS EN ISO BRITISH STANDARD 15976:2002 Incorporating Corrigenda Nos. 1 and 2 Closed end blind rivets with break pull mandrel and protruding head - St/St The European Standard EN ISO 15976:2002 has the status of a British Standard ICS 21.060.40 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW British Standards BSENIS0 15976:2002 National foreword This British Standard is the official English language version of EN ISO 15976:2002. It is identical with ISO 15976:2002. BS EN ISO 15976:2002, together with BS EN ISO 14588:2001, BS EN ISO 14589:2001, BS EN ISO 15973:2000, BS EN ISO 15974:2001, BS EN ISO 15975:2002, BS EN ISO 15977:2002, BS EN ISO 15978:2002 and BS EN ISO 15979:2002, supersedes BS 7349-1:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee FME/6, Rivets, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages i and i, a blank page, pages 1 to 5, the Annex ZA page, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard, having Amendments issued since publication been prepared under the direction of the Engineering Sector Policy and Strategy Amd. No. Date Comments Committee, was published under the authority of the 14325 3 February 2003 Standards Policy and Strategy Correction to EN ISO foreword page and Committeeand comesinto Corrigendum No. 1 addition of Annex ZA page details effect on 20 November 2002 15345 29 November 2004Correction to National foreword Corrigendum No. 2 supersession details BSI 29 November 2004 ISBN 0 580 40780 2 EN ISO 15976 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November 2002 ICS21.060.40 English version Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002) Rivets aveugles a rupture de tige a corps ferme, a tete Geschlossene Blindniete mit Sollbruchdorn und Flachkopf bombée-St/St (ISO15976:2002) St/St (ISO 15976:2002) This European Standard was approved by CEN on 14 October 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standardsmaybeobtained onapplicationtotheManagementCentreortoany CENmember. This European Standard exists in three official versions (English, French, German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. cer EUROPEANCOMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG ManagementCentre:ruedeStassart,36B-1050Brussels 2002CEN All rights of exploitation in any form and by any means reserved Ref. No. E