ISO INTERNATIONAL STANDARD 15642 First edition 2003-05-15 Road construction and maintenance equipment Asphalt mixing plants - Terminology and commercial specifications Equipement pour la construction et I'entretien des routes Installations de traitement de I'asphalte - Terminologie et spécifications commerciales Reference number ISO 15642:2003(E) ISO @ ISO 2003 by IHS under lic Not for Resale ISO15642:2003(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below ISO2003 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, IsO's member body in the country of the requester. ISO copyright office Case postale 56 . CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland @ ISo 2003 - All rights reserved py IHS unde ermittedwithoutlicense from IHS Not for Resale ISO15642:2003(E) Contents Page Foreword Introduction 1 Scope 2 Normative references 3 Terms and definitions 4 Descriptions of coating and/or mixing plants 4.1 Functions of the plant... 4.2 Components of asphalt mixing plants 4.3 Additional equipment ..... 4.4 Mastic asphalt production plants.. 4.5 Control of plant operation. 4.6 Automatic function controls 4.7 Control station.. 5 Output of an asphalt mixing plant... 8 6 Commercial specifications..... 6.1 Technical characteristics of the components of asphalt mixing plant 6.2 Global characteristics for plants to be specified by the manufacturer.. 15 Annex A (informative) Examples of plants and sub-assemblies. 17 Copyright International Organizaion for Standardization rights reserved ili Not for Resale ISO 15642:2003(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been non-governmental, in liaison with isO, also take part in the work. iso collaborates closely with the International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO 15642 was prepared by Technical Committee ISO/TC 195, Building construction machinery and equipment. @ISO2003-Allrightsreserved onal Organization for Standardizatior ISO 15642:2003(E) Introduction This International Standard deals with asphalt mixing plants used in road construction and maintenance processes and their components is shown. V ing p Not for Resale aadizao No reproductic neworkingmitedwithout licenefrmH Not for Resale INTERNATIONAL STANDARD ISO15642:2003(E) Road construction and maintenance equipment - Asphalt mixing plants Terminology and commercial specifications 1 Scope This International Standard establishes the terminology, gives