BS EN ISO BRITISH STANDARD 15614-6:2006 Specification and qualification ofwelding procedures for metallic materials Welding procedure test - Part 6: Arc and gas welding of copper and its alloys The European Standard EN IS0 15614-6:2006 has the status of a British Standard ICS 25.160.10 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Not for Resale BS EN ISO 15614-6:2006 National foreword This British Standard is the official English language version of EN ISO 15614-6:2006. It is identical with ISO 15614-6:2006. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Qualification of welding personnel and welding procedures, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index", or by using the “Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page. pages 1 to 23 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard was Amendments issued since publication published undertheauthority of the Standards Policy and Amd. No. Date Comments StrategyCommittee on 28 April 2006 BSI 2006 ISBN 0 580 48158 1 Copyright British Standards Institution vided by IHS under lic om IHS Not for Resale EN ISO 15614-6 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHENORM April 2006 ICS25.160.10 English Version Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) Descriptif et qualification d'un mode operatoire de soudage Anforderung und Qualifizierung von SchweiBverfahren fur pour les matériaux metalliques - Epreuve de qualification metallische Werkstoffe - SchweiBverfahrensprufung - Teil 'd'un mode operatoire de soudage - Partie 6: Soudage a 6: LichtbogenschweiBen von Kupfer seinen Legierungen I'arc et aux gaz du cuivre et de ses alliages (ISO15614-6:2006) (ISO 15614-6:2006) This European Standard was approved by CEN on 16 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal,Romania Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG Management Centre: rue de Stassart, 36