BS EN ISO BRITISH STANDARD 15614-4:2005 Specification and qualification ofwelding procedures for metallic materials Welding procedure test- Part 4: Finishing welding of aluminium castings The European Standard EN IS0 15614-4:2005 has the status of a British Standard ICS 25.160.10 BSi NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards Not for Resale BS EN ISO 15614-4:2005 National foreword This British Standard is the official English language version of EN ISO 15614-4:2005. It is identical with ISO 15614-4:2005. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Qualification of welding personnel and welding procedures, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publicationsreferred tointhis documentmaybefound intheBsICatalogue under the section entitled “International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.Usersareresponsibleforits correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages i to iv, pages 1 to 15, Annex ZA page, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication This British Standard was published under the authority Amd. No. Date Comments of the Standards Policy and Strategy Committee on29July2005 BSI29July2005 ISBN 0 580 46423 7 Copyright British Standards Institution Not for Resale EN ISO 15614-4 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM July 2005 ICS25.160.10 English Version Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) Descriptif et qualification d'un mode operatoire de soudage Anforderung und Qualifizierung von SchweiBverfahren fur pour ies materiaux metalliques - Epreuve de qualification metallische Werkstoffe - SchweiBverfahrensprufung - Teil d'un mode operatoire de soudage - Partie 4: Reparation par 4: FertigungsschweiBen von Aluminiumguss (ISO 15614- soudage pour les travaux de finition des pieces moulees en 4:2005) aluminium (ISO 15614-4:2005) This European Standard was approved by CEN on 20 June 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,Greece,Hungary, Iceland, Ireland, Italy,Latvia,Lithuania, Luxembourg,Malta, Netherlands, Norway,Poland,Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG Management Centre: rue de Stassart, 36 B-1050 Brus