BS IS0 15531-1:2004 BSl Standards Publication Industrial automation systems and integration - Industrial manufacturing management data Part 1: General overview bsi. BSIS0 15531-1:2004 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 15531-1:2004. The UK participation in its preparation was entrusted to Technical Committee AMT/4, Industrial data and manufacturing interfaces. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2023 Published by BSI Standards Limited 2023 ISBN 9780539222050 ICS 25.040.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2023. Amendments/corrigenda issued since publication Date Textaffected BS IS0 15531-1:2004 INTERNATIONAL ISO STANDARD 15531-1 First edition 2004-03-01 Industrial automation systems and integration Industrial manufacturing management data - Part 1: General overview Systemes d'automatisation industrielle et integration Données de gestion de fabrication industrielle Partie 1: Apercu genéral Reference number ISO 15531-1:2004(E) ISO @ISO2004 BSIS0 15531-1:2004 ISO 15531-1:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In accepts no liability in this area. Adobe is a trademarkof Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ?ISO2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, IsO's member body in the country of the requester. ISO copyright office Case postale 56. CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org ii @ISO 2004 -All rights reserved BS IS0 15531-1:2004 ISO 15531-1:2004(E) Contents page 1 Scope 2 Normative references 3 Terms, definitions and abbreviations 3.1 Terms defined in ISO 10303-1 3.2 Terms defined in ISO 10303-11 3.3 Terms defined in ISO/IEC 2382-24 3.4 Terms defined in ISO 13584-42 3.5 Terms defined in ISO 14258.. 3.6 Other terms and definitions.. Overview of ISO 15531 12 4.1 Concepts provided . 4.2 Parts 15531-2x series (Production data for external exchanges) 13 4.3 Parts 15531-3x series (Manufacturing resources usage management data). 14 4.4 Parts 15531-4x series (Manufacturing flow management data) 5 Relationships between the various series of parts of ISO 15531 16 Annex A (normative) ASN.1 Identifier of ISO 15531-1 Annex B (informative) Relationship between ISO 15531 and other standards or stand