EN IEC 82474-1 EUROPEANSTANDARD NORMEEUROPEENNE EUROPAISCHENORM July 2025 ICS 01.110; 13.020.01 English Version Material declaration-Part1:General requirements (IEC 82474-1:2025) Declaration de matieres - Partie 1 : Exigences generales Materialdeklaration - Teil 1: Allgemeine Anforderungen (IEC 82474-1:2025) (IEC 82474-1:2025) This European Standard was approved by CENELEC on 2025-06-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the samestatus astheofficialversions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkiye and the United Kingdom. CENELEC EuropeanCommitteeforElectrotechnical Standardization ComitéEuropéendeNormalisationElectrotechnique Europaisches Komitee fir Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels Ref. No. EN IEC 82474-1:2025 E ENIEC82474-1:2025 (E) European foreword "Environmental standardization for electrical and electronic products and systems"was submitted to the IEC-CENELECparallel voteand approved by CENELECas ENIEC 82474-1:2025. The following dates are fixed: latest date by which the document has to be implemented at national (dop) 2026-07-31 level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the(dow) 2028-07-31 documenthavetobewithdrawn Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Anyfeedback and questions on this document should be directed to the users'national committee.A complete listing of these bodies can be found on the CENELEC website. Endorsement notice Thetext of the International Standard IEC82474-1:2025 was approved by CENELEC asa European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standard indicated: IEC62430:2019 NOTE Approved as EN IEC 62430:2019 (not modified) IEC 62656-1:2014 NOTE Approvedas EN62656-1:2015 (not modified) IEC 82045-1:2001 NOTE Approved as EN 82045-1:2001 (not modified) IEC 82045-2:2004 NOTE Approved as EN 82045-2:2005 (not modified) IEC 62321-2:2021 NOTE Approved as EN IEC 62321-2:2021 (not modified) ISO 1043-1:2011 NOTE Approved as EN ISO 1043-1:2011 (not modified) ISO 1043-2:2011 NOTE Approved as EN ISO1043-2:2011 (not modified) ISO 1043-3:2016 NOTE Approved as EN ISO 1043-3:2016 (not modified) ISO 9000:2015 NOTE Approved as EN ISO 9000:2015 (not modified) ISO 14020:2022 NOTE Approved as EN ISO 14020:2023 (not modified) ISO14024:2018 NOTE Approved as EN ISO 14024:2018 (notmodified) ISO14025:2006 NOTE Approved as EN ISO 14025:2010 (not modified) ISO14040:2006 NOTE Approved as EN ISO 14040:2006 (not modified) 2 EN IEC 82474-1:2025 (E) Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this doc