IEC INTERNATIONAL STANDARD 62403 First edition 2005-06 EAEDBOOKSPLYBURAU High density recording format on CD-R/RW disc systems - HD-BURN format [EC Referencenumber IEC 62403:2005(E) Publication numbering As from 1 January 1997all IEC publications are issued with adesignation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidatededitions The IEC is now publishing consolidated versions of its publications.For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively,to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments1and2 FurtherinformationonIEC publications The technical content of IEC publications is kept under constant reviewby theIEC, thus ensuring that the content reflects current technology. Information relating to HOENSERTALUSENI TISLOCEANIONBANYASORLIED BY BO SPLY BUREAU. this publication,including its validity,is available in the IEc Catalogue of publications (see below)in addition to new editions,amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also availablefrom thefollowing: IECWeb Site (www.iec.ch) Catalogue of IEC publications and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summaryof recently issued publications (www.iec.ch/online news/ justpub) is also availableby email.Please contact the Customer Service Centre (see below)for further information. CustomerServiceCentre If you have any questions regarding this publication or need further assistance, pleasecontactthe CustomerServiceCentre: Email:[email protected] Tel: +41229190211 Fax: +41229190300 IEC INTERNATIONAL STANDARD 62403 First edition 2005-06 EDBYBOSULYBURU HighdensityrecordingformatonCD-R/RWdisc systems - HD-BURN format mite ASLUP IEC2005 Copyright - all rights reserved International Electrotechnical Commission, 3, rue de Varembe, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +4122 919 03 00 E-mail: [email protected] Web: www.iec.ch U IEC PRICECODE Commission Electrotechnique Internationale International Electrotechnical Commission MexAyHapoAHanSneKTpOTexHMyeCKagKoMMCCMa For price, see current catalogue 62403@IEC:2005(E) 2 CONTENTS Scope. 2 Normative references. .6 3 Terms and definitions. 4 Conventionandnotations 8 4.1 Representationofnumbers 4.2 Names... 5 List of acronyms 9 General requirements 6 10 6.1 Environment. 10 6.2 Unrecorded disc. 6.3 Recorded disc... 11 NS 7 Mechanical and physicalcharacteristics 11 7.1 Mechanical parameters 7.2 Optical parameters.. 7.3 Recording parameters... 8 Disc format. 8.1 Track format... 8.2 Dataframeformat ATI 8.3 ECc block format. 13 8.4 Recordingframes. 13 8.5 Physical sectors 13 NLGAS 8.6 Sectornumber 8.7 Format of the inner area. 8.8 Format of the userdata area 22 8.9 Format of the lead-out area.. 22 File system. 9 22 AnnexA(normative)Astandarddisc .23 AnnexB(normative)ATiPsynchronizationrule AnnexC(normative)General linking rules(ATiP) .30 Figure 1 - Track layout.... ...12 Figure2-Sectorstructure 12 Figure 3-PCA structure 13 Figure 4- Lead-in (PMD) data structure. Figure5-Multi-sessionstructure Figure 6 - Lead-in (PMD) data structure .. Figure A.1 -Read only optical pick up ... ..23 Figure A.2 -Recorder optical pick up... Figure A.3-Modulation amplitude and signal asymmetry. .26 Figure A.4-General system diagram for jitter measurement.. ..26 Figure A.5 -Write strategy pulse... .27 Figure A.6-Write strategy pulse for CD-RW disc.. - 3 - 62403@IEC:2005(E) Figure B.1 -ATIP synchronization rule. 29 Figure C.1 - Write start for general linking rules (ATIP) Figure C.2 - Write stop for general linking rules (ATIP) 30 Table 1-PMApadding dataformat. 14 Table 2-TPMA structure-1 Table 3-TPMA st