IEC INTERNATIONAL STANDARD 62258-5 First edition 2006-08 Semiconductor die products- Part 5: Requirements for information concerning electrical simulation IEC Referencenumber IEC 62258-5:2006(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1is now referred to as IEC 60034-1. Consolidated editions The IEc is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively,to the base publication, the amendments 1 and 2. FurtherinformationonIECpublications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this.publication, including its.validity, is available in the IEc Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEc Web Site (www.iec.ch) Catalogueof IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IECJustPublished This summary of recently issued publications (www.iec.ch/online news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information Customer Service Centre If you have any questions regarding this publication or need further assistance. please contactthe Customer Service Centre: Email: [email protected] Tel: +41 22 919 02 11 Fax: +41229190300 IEC INTERNATIONAL STANDARD 62258-5 First edition 2006-08 Semiconductor die products - Part 5: Requirements for information concerning electrical simulation @IEC 2006 —Copyright-all rights reserved mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembe, PO Box 131, CH-1211 Geneva 20, Switzerland M IEC PRICECODE Commission Electrotechnique Internationale International Electrotechnical Commission MekAyHapoAHag3nekTpoTexHuyeckagKomwcCWg For price, see current catalogue 62258-5 @IEC:2006(E) .2 CONTENTS FOREWORD. INTRODUCTION Scope 2 Normativereferences. 6 3 Terms and definitions 6 4 General 6 Requirements for information on electrical simulation models. 5 5.1 Information on the electrical simulation model. 5.2 Information on device connectivity... 5.3 Information on the timing simulation model 5.4 Information on connection redistribution.. 5.5 Informationonpackageterminals Annex A(informative)Supporting information 10 Bibliography 12 62258-5@IEC:2006(E) - 3 - INTERNATIONALELECTROTECHNICALCOMMISSION SEMICONDUCTORDIEPRODUCTS Part 5:Requirementsfor information concerningelectricalsimulation FOREWORD The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising 1) electrotechnical committees (IEC National Committees). all national The object of IEC is topromote this end and in addition to other activities, ,IEC publishes International Standards,Technical Specifications. Technical Reports, PubliclyAvailable Specifications (PAS) and Guides (hereafter referred to as "EC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work.,International, governmental and non- with the International Organization for Standardization (IsO) in accordance with conditions determined by agreementbetweentnetwoorganizations The formal decisions or agreements of IEc on technical mat