IEC INTERNATIONAL STANDARD 61029-2-10 First edition 1998-06 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders Sécurité des machines-outils électriques semi-fixes - Partie 2-10: Regles particulieres pour les tourets a couper IEC Reference number IEC 61029-2-10: 1998 Numbering Asfrom1January1997all IECpublicationsareissuedwithadesignation inthe60000series Consolidated publications Consolidated versions of some IEc publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued,is tobefound at thefollowing IEC sources: IEC web site* Catalogue of IEC publications Published yearly with regular updates (On-line catalogue)* IEC Bulletin Available both at the IEC web site* and as a printed periodical Terminology, graphical and letter symbols For general terminology, readers are referred to IEC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols and signs approved by the IEc for general use, readers are referred to_publications IEC 60027: Letter symbols to be used in electrical technology,IEC 60417:Graphicalsymbolsforuseonequipment.Index,surveyandcompilation of the single sheets and IEC 60617: Graphical symbols for diagrams. See web site address on title page. IEC INTERNATIONAL STANDARD 61029-2-10 First edition 1998-06 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders Sécurité des machines-outils électriques semi-fixes - Partie 2-10: Regles particulieres pour les tourets a couper @ IEC 1998 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission 3, rue de Varembe Geneva, Switzerland Telefax: +4122 919 0300 e-mail: [email protected] IEC web site http://www.iec.ch Commission Electrotechnique Internationale Q PRICE CODE International Electrotechnical Commission MemMAyHapoAHan neKTpOTexHyeCHaa KoMuCcHA For price, see current catalogue