IEC INTERNATIONAL STANDARD 60874-14-9 QC 910004XX0009 First edition 1999-09 Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre type B1 - Detail specification Connecteurs pour cables et fibres optiques - Partie 14-9: Connecteur pour fibres optiques de type SC-APC 8° (reégle) terminé sur une fibre monomodale de type B1 - Specificationparticuliere IEC Reference number IEC 60874-14-9:1999(E) Numbering 60000 series. Consolidated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the publication incorporating amendments 1 and 2. Validity of this publication Thetechnical contentof IEC publications iskept underconstant reviewby the IEC, Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following iEC sources: IECwebsite* Catalogue of IEC publications Published yearly with regular updates (On-line catalogue)* IEC Bulletin Available both at the IEC web site* and as a printed periodical Terminology, graphical and letter symbols For general terminology, readers are referred to IEC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols and signs approved by the IEc for general use, readers are referred to publications IEC 60027: Letter symbols to be used in electrical technology, IEc 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEc 60617: Graphical symbols fordiagrams. See web site address on title page. IEC INTERNATIONAL STANDARD 60874-14-9 QC 910004XX0009 First edition 1999-09 Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre type B1 - Detail specification Connecteurs pour cables et fibres optiques - Partie 14-9: Connecteur pour fibres optiques de type SC-APC 8° (reglé) terminé sur une fibre monomodale de type B1 - Speécification particuliere @ IEC 1999 — Copyright - all rights reserved mechanical, including photocopying and microfilm, without permission in writing from the publisher. InternationalElectrotechnical Commission 3,rue deVarembeGeneva,Switzerland Telefax: +41 22 919 0300 e-mail: [email protected] IEC web site http://www.iec.ch Commission Electrotechnique Internationale R PRICE CODE EC International Electrotechnical Commission MemAyHapoAHan 3nekTpoTexHMyeCkan KoMuCCuA Forprice, see current catalogue