BSENIEC 62453-2:2022 BSl Standards Publication Field device tool (FDT) interface specification Part 2: Concepts and detailed description bsi. BSENIEC 62453-2:2022 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 62453-2:2022. It is identical to IEC 62453-2:2022. It supersedes BS EN 62453-2:2017, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GEL/65/3, Industrial communications: process measurement and control, including fieldbus. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2022 Published by BSI Standards Limited 2022 ISBN 978 0 539 153873 ICS 25.040.40; 35.100.05; 35.110 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2022. Amendments/corrigenda issued since publication Date Text affected BSENIEC 62453-2:2022 EN IEC 62453-2 EUROPEAN STANDARD NORMEEUROPEENNE EUROPAISCHE NORM October2022 ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-2:2017 English Version Field device tool (FDT) interface specification - Part 2: Concepts and detailed description (IEC 62453-2:2022) Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 2: terrain (FDT) - Partie 2: Concepts et description detaillee Konzept und grundlegende Beschreibung (IEC 62453-2:2022) (IEC62453-2:2022) This European Standard was approved by CENELEC on 2022-10-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the nationalelectrotechnical committees of Austria, Belgium,Bulgaria,Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain,Sweden, Switzerland, Turkiye and the United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comite Europeen de Normalisation Electrotechnique Europaisches Komitee fir Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels @ 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref.No.ENIEC 62453-2:2022E