论文标题
STIS光栅G230lb中的散射光
Scattered Light in STIS Grating G230LB
论文作者
论文摘要
与ETIS的CCD检测器一起使用的G230磅光栅散布了红光。在红色物体中,散射的光与紫外线信号混合,导致虚假波长通量和弱化的吸收特征。最近的校准观测表征了使用妈妈检测器和类似G230L的重复观测来表征散射光的特征。完整的二维光谱几乎包含有用的信息来减轻散射的光问题。对于一维萃取的光谱,可以将散射的光近似建模为坡道的基座,其振幅与物体的V波段通量成正比。我们提出了用于散射光更正的公式。对于恒星比G0光谱类型温暖,校正是多余的。隔离中心的定位似乎不影响散射光的性质。因此,我们能够从点源公式推断扩展对象的校正公式。还列出了由于0.2 ARCSEC缝隙中偏置缝隙定位引起的通量校正的多项式校正。
The G230LB grating used with STIS's CCD detector scatters red light. In red objects, the scattered light mingles with the ultraviolet signal, causing spurious short-wavelength flux and weakening absorption features. Recent calibration observations characterize the scattered light using duplicate observations with the MAMA detector and similar grating G230L. The full two-dimensional spectrum contains little helpful information to mitigate the scattered light problem. For one-dimensional, extracted spectra, the scattered light can be approximately modeled as a ramped pedestal whose amplitude is proportional to the object's V-band flux. We present formulae for scattered light corrections. For stars warmer than G0 spectral type, correction is superfluous. Off-slit-center positioning appears not to affect the properties of the scattered light. Therefore, we are able to extrapolate correction formulae for extended objects from the point source formulae. Polynomials for flux corrections due to off-center slit positioning in the 0.2 arcsec slit are also tabulated.